Results 1 to 12 of 12
Thread: Snowbasin Helmetcam video
-
10-04-2006, 08:15 AM #1
Snowbasin Helmetcam video
Helmet cam video is done.
Warning, it's pretty shaky. Time for new suspension on the bike.
-
10-04-2006 08:15 AM # ADS
-
10-04-2006, 11:12 AM #2
sombeech,
It's not too shaky. About what I would expect from Mt Bike.
Having a subject in the shot like the rider ahead of you really makes you focus on that so you don't notice the shaking. I have also notice that if you have something stable (relative to the camera) such as the visor on your helmet in the shot it seems to add stability to the imagery.
Looks like you captured some good color. Is this shot with the HC-32?
Have you tried shooting with the camera facing to the rear?
My best shots are that way. You have to pactice turning your head the wong way on turns so the camera tracks the person behind you.
I stopped using google video. It stomps on the image too hard and makes great video look crappy. Have you tried youtube or myspace?
Both seem to present the video much better than google IMHO.Please buy my book - "Paiute ATV Trail Guide" at www.atvutah.com - I need gas money!!!!
-
10-04-2006, 12:36 PM #3Originally Posted by RedMan
I think I need to switch back to my old blue helmet. It seemed like I got steadier shots with it.
I'm thinking the cam wobbles too much on my black helmet.
I haven't tried the rearview shot yet, but have thought about it all year long. As soon as I get the LANC hooked up, I'll start experimenting more. I've been too anxious to get the "first" footage of the trail, so next year I'll start some different shots.
I also like the shots where the camera is side-mounted on the front fork. That fork arm in the frame would add stability, and you could get a shot really low on the trail.
Thanks for the suggestions.
-
10-04-2006, 01:06 PM #4
I think the most interesting and stable shots I have seen on an Mt. Bike were from a cam mounted on the frame below or on the seat post point rearward.
On a full suspension bike the rear tire appears to bob in and out of the shot adding a steadicam look to the imagery.
The following bike has to be almost clipping you for really good images with the Wide Angle. Even 10 feet back makes them look small. The best shots have the rider filling the screen and gives the viewer a real sense of being there in the middle of the action.
The main mistake I made was thinking that the viewer was really getting a lot from the scenery, when in fact they are really focused on the other rider and the scenery is just a cool looking backdrop for the action.
So now I go for more focus on the action than the scenery. The more I fill the scene with the other rider, the less I notice shaking or vibration.
.....he says as he trudges of to the Mac to download 6 new tapes shot last week.Please buy my book - "Paiute ATV Trail Guide" at www.atvutah.com - I need gas money!!!!
-
10-04-2006, 01:17 PM #5Originally Posted by RedMan
I really want to try mounting the cam to my frame. I'll have to wait until next week when my new camcorder is in.
-
10-04-2006, 05:52 PM #6
Only mount the bullet on the bike.
The vibration will kill the mini-dv.
Carry it on you.
Seen a few die an early death.
Another great shot is mounted on the bars looking up at the rider (beware of the nostril shot) and on the rear tiangle support looking forward catching your foot and pedals.Please buy my book - "Paiute ATV Trail Guide" at www.atvutah.com - I need gas money!!!!
-
10-04-2006, 10:44 PM #7Originally Posted by RedMan
Any suggestions for mounting bracket on the round tube?
-
10-05-2006, 07:05 AM #8
I have a Manfrotto Superclamp that I use on the ATV racks.
This is just the clamp. It has a hole in it that accepts a standard 5/8" stud.
I also use a Magic Arm in the clamp that allows me to place the camera just about anywhere. It works okay but has a tendancy to vibrate when fully extended.
I usually use it fairly collapsed but it allows amazing placement.
Alternativiely you can get a Ram camera mount. It not as versatile but will work well. http://www.ram-mount.com/camera_mount/camera_mounts.htm
Viospport has a bunch of options here: http://www.viosport.com/store/custom...hp?cat=245#246
I use one of these fanny packs. Seems to fit everything well and its not too big. Lowepro Orion Mini.
Please buy my book - "Paiute ATV Trail Guide" at www.atvutah.com - I need gas money!!!!
-
10-13-2006, 02:05 PM #9Originally Posted by RedMan
Or, is there anywhere local that you can get accessories like this? Thanks.
-
12-24-2006, 07:37 PM #10
I went out and bought that Manfrotto SuperClamp. They had it at Wasatch Photographic, on 3900 South. 32 bucks, pretty good.
-
01-01-2007, 10:06 PM #11Originally Posted by RedMan
One trick I use when I prepare a video for youtube is when I'm done editing, I save the video to a higher res like 1280 x 720 HD...the Wasatch one ended up being 600MB. Then I put it into Windows Movie Maker and adjust it to save the movie to 100MB. It seems to keep it sharper when youtube does whatever they do to it...or maybe its my imagination. I know when i send them one that I saved as low res it comes out really blurry on their end. All you have to do is keep it under 10 min and 100MB {Finally found a use for Windows Movie Maker}
-
01-02-2007, 09:57 AM #12Originally Posted by Tucker
Similar Threads
-
[How To] How to Make a Helmetcam for $15
By Sombeech in forum General DiscussionReplies: 13Last Post: 02-01-2010, 06:24 PM -
Snowbasin, UT 1/22/08 (with video)
By FirstTracks in forum Skiing, Snowboard, XC and SnowshoeingReplies: 6Last Post: 01-24-2008, 09:48 PM -
Snowbasin helmetcam video -- remixed
By Sombeech in forum Mountain Biking & CyclingReplies: 0Last Post: 01-02-2007, 11:07 PM -
Snowmobile helmetcam video
By Sombeech in forum SnowmobilesReplies: 4Last Post: 12-23-2006, 08:34 PM -
Slickrock helmetcam video (final)
By Sombeech in forum Mountain Biking & CyclingReplies: 8Last Post: 12-13-2006, 08:46 AM
Visitors found this page by searching for:
Outdoor Forum