Lomation/Krill Trip Report 12/9/1015

Through the generosity of friends I was able to descend Lomation/Krill yesterday despite having nearly all my canyoneering gear stolen :angryfire:. This was my virgin trip through these two and it was well worth the wait. December temps in the upper forty’s and not another sole in the fiery furnace made the experience even better. These canyons defiantly pack a lot of variety, arches and views in a short distance from home.

As of 12/9/15 there was no snow or ice in the canyons. This will likely change with the coming storms on Friday. All anchors were intact with good webbing. We utilized a fiddlestick/ smoother operator for all raps. Under the new policy of not using Abbey arch the “new” location of first rap is causing new rope groves to appear. This makes an excellent place for releasable anchor to help with this issue.


Attachment 82477

Attachment 82478

Attachment 82479

Attachment 82480

Attachment 82481

Attachment 82482

Attachment 82483

Attachment 82484

Attachment 82485

Attachment 82486

Attachment 82487

Attachment 82488

Nice shot!


Sent from my iPhone using Tapatalk

That had to be one of the most scenic canyons that I have been on for awhile. Thanks for the handling on some of those tricky moves!

For everyone's information:
I have finally filed an application with the NPS to install a two bolt anchor near Abbey Arch and have lined up someone to help with that installation. Hopefully, the application will be approved and we can get this done by early March and mostly eliminate the rope grooving that's developing.
Glad you had a good trip through there & found some solitude. Not always the case in the Fiery Furnace! Those routes do mix it up nicely.

When/if you install the bolts it would be a good idea to document the location with a couple pictures and measure the drop so others can update their beta accordingly. The easiest method for measuring a similar drop is to know how long your ropes actually are and than measure how much rope is on the ground.

In my humble opinion the sooner the bolts are installed the better. Good luck.

Quote:

---

Originally Posted by peakbaggers

For everyone's information:
I have finally filed an application with the NPS to install a two bolt anchor near Abbey Arch and have lined up someone to help with that installation. Hopefully, the application will be approved and we can get this done by early March and mostly eliminate the rope grooving that's developing.
Glad you had a good trip through there & found some solitude. Not always the case in the Fiery Furnace! Those routes do mix it up nicely.

---

When you go, let me know :) I would love to see you guys again. And it would be fun to run Lomatium and Krill again :)

Quote:

---

Originally Posted by Kuya

When you go, let me know :) I would love to see you guys again. And it would be fun to run Lomatium and Krill again :)

---

Thank you for taking this project on. Where are you looking to place the bolts?

Quote:

---

Originally Posted by RyanGJ

Thank you for taking this project on. Where are you looking to place the bolts?

---

Yes inquiring minds would like to know. If any way possible if they could be in the arch area would be awesome. That's a much better rappel. I would imagine you're over by the tree rappel.

X2... somewhere near the arch who be primo!

FYI - for all interested, the park officials we discussed this with over a year ago now, did not appear to favor a permanent installation anywhere near the arch, hence, we have submitted on the app a location where the drainage spills over and near the juniper tree some were using for an anchor. The rappel in that location does not really go "free" but is still dramatic and highly vertical. I think the operative word here is "compromise." People can still easily "visit" the arch area - just a few steps away, then backtrack to set up the rap. Right now, a 200 foot rope & equal pullcord will get you down from the tree. When we do the install, we'll get a better measurement. Kuya, we'll keep you posted on when we go if the app is approved. I applied for 4 persons to do the job. Already have 3 lined up but the number is not set in stone - pun intended. The holes have to be hand drilled and the bolts must be glue-in type. The attached photo should give some perspective on the spot we applied for.
Attachment 82534

Quote:

---

Originally Posted by peakbaggers

Kuya, we'll keep you posted on when we go if the app is approved. I applied for 4 persons to do the job.

---

No worries, I can snag my own Canyoneering permit for that day. :)

Any update on those bolts? Never been through these canyons myself but after some extensive "google earthing" and an exploratory hike in the furnace I feel confident in finding the route myself. It would be nice to know what sort of anchor I'll be using for that first rap though.

Quote:

---

Originally Posted by jacksonbodtker

Any update on those bolts? Never been through these canyons myself but after some extensive "google earthing" and an exploratory hike in the furnace I feel confident in finding the route myself. It would be nice to know what sort of anchor I'll be using for that first rap though.

---

More than 2 months ago I received a call from the park saying the application had been "approved" for a bolt, but it could not be a glue-in type. But they also indicated there was still one other "approval" or something the application had to go through. Waited about 3 weeks without hearing anything so called back. Was assured something would be forthcoming soon, but not a word since. Because this was the first application under the new guidelines/rules, they seemed to have several issues to work out. So no bolts for now and a fiddlestick type setup for the Abbey Arch rap (if you know what you're doing) would cause the least amount of grooving or damage. I would urge not using the pinyon tree directly behind the arch because the rope will likely still rub against a section of the arch once weighted. Use the juniper across the wash from the spill over point - well before the arch.

Proof that's it's much better to ask for forgiveness than to ask for permission.

Quote:

---

Originally Posted by jacksonbodtker

Any update on those bolts? Never been through these canyons myself but after some extensive "google earthing" and an exploratory hike in the furnace I feel confident in finding the route myself. It would be nice to know what sort of anchor I'll be using for that first rap though.

---

I'm interested to hear how this goes. Please post a trip report after.

Sent from my SM-G935V using Tapatalk