Here is to sending good vibe to a brother down

[Mtnseeker1]

Well I 'll start this with good wishes for GARBO
Then I take s little time to laugh at him then laugh just a little more.

But really bro. the most important thing is I do feel for you just enough to keep you in mind.lol.

I'm hoping this will piss you off enough to help with any recovery. Take care and remember the good stuff is a comming up.

So in short I say don't trust that front wheel as you have but rather get your ass a little sideways in the seat (counter balance if you will) and get her done you crazy bastard.

LOVE you bro and get well fast because I do have some shit up my sleeve.:lol8:
And I have this plan that you just cant miss.

[Garbanzo]

Thanks for the crap and well wishes.:lol8: Acca and I were just discussing why I slide into so many dirt naps. We decided I'm just lazy and not attentive at times. I already knew that.
They have a clinic in SoCal that teaches some advanced skills that would be cool. I wondering if they just have a class on how to stay upright.:roflol:
Don't be holding out on us. If you have a plan, share it buster!!:nono:

Here is a photo of the result of my separated collar bone (graphic image of an Orangutan). It already has a full head of hair, so I'm just going to paint a face on it and call it Nubby. IF you had questions about our Evolution from Apes, this should relieve any doubt!!:nod:

[Mtnseeker1]

:roflol: Good heck that looks by far better than :stud::stud::stud:most my joints , So just what the frigg is the problem bro.
And as a side note: AFC just as soon as you can I say.
Hang in there and we will ride again bro.

[Mtnseeker1]

By the way Garbo, I get a lot of stuff form friends when I have to shave my ears at my age.:bootyshake:
Happy to so you typing and this means good news is in short notice:

[accadacca]

The hunch shoulder of Bogley. :lol8:

[Mtnseeker1]

So tell me this just because I'm thinking as wild as I do::
If you were wearing a neck thingy would it have saved you?
In other words it seems like most of these type of breaks are a result of the helmet coming down on the collar bone? OR?
The only reason I ask is I have been thinking that it may just be worth riding with.:cheers:

[Mtnseeker1]

Dang acca I was trying to eat this here super hero sandmich and drink beer after a long day of riding and I almost chocked to death the this here hunchback gag thing.:lol8:

[Garbanzo]

The hunch shoulder of Bogley. :lol8:

I prefer IGOR.

[Garbanzo]

So tell me this just because I'm thinking as wild as I do::
If you were wearing a neck thingy would it have saved you?
In other words it seems like most of these type of breaks are a result of the helmet coming down on the collar bone? OR?
The only reason I ask is I have been thinking that it may just be worth riding with.:cheers:

I'm not sure about the neck support. This was a dead-on landing on the side of my arm. At first, I thought my folded arm had broke ribs. Glad it didn't.

[Mtnseeker1]

Awesome Mark, Hope your feeling good to go by then but please don't push it to fast and heal up right BRO.
We are not exactly spring chickens anymore. And this over the 50 mark takes longer than it used to. :)

And after looking at your vid I can see it was a major hit to the shoulder.

It just seems that between MTB and MOTO that a lot of these kind of breaks are a result of the edge of the helmet making contact.

[accadacca]

Mark's new ride... :haha:

53777

[Garbanzo]

Mark's new ride... :haha:

53777

Keep up boys! This thing is geared for speed.

[Garbanzo]

53881

Can't ride, but I can certainly add some bling!!

[fourtycal]

Can't ride, but I can certainly add some bling!!

Is that the stock cover just painted? It looks nice.

[Garbanzo]

Is that the stock cover just painted? It looks nice.

I put a large hole in the stock one. After a layer of JB Weld, Aluminum, 3 layers of fiberglass and some gel coat, I laughed at myself and threw it away.
This is a Billett unit I picked up from Cycle Buy. The stock ones are cast, and basically pretty weak. Well, for me anyway.:lol8:

[fourtycal]

I put a large hole in the stock one. After a layer of JB Weld, Aluminum, 3 layers of fiberglass and some gel coat, I laughed at myself and threw it away.
This is a Billett unit I picked up from Cycle Buy. The stock ones are cast, and basically pretty weak. Well, for me anyway.:lol8:

I thought it looked machined instead of cast. Shaped like the one I just got from Rekluse :cool2:. Heal up quick man, we have some exploring to do :2thumbs:

[Garbanzo]

I thought it looked machined instead of cast. Shaped like the one I just got from Rekluse :cool2:. Heal up quick man, we have some exploring to do :2thumbs:

Thanks man! Looking forward to it